Low Carbon Alloy Steel Pressure Tube Data

Heat Exchanger Tube Tolerances

Specification Size O.D. Range Inches Tolerances
O.D. Wall
Plus Minus Plus Minus
ASTM-A-179 Under 1.000 .004" .004" 20% 0%
ASME-SA-179 1.000 to 1.500 .006" .006" 20% 0%
Cold Drawn Seamless 1.501 to 1.999 .008" .008" 22% 0%
Heat Exchanger Tube 2.000 to 2.499 .010" .010" 22% 0%
Minimum Wall 2.500 to 2.999 .012" .012" 22% 0%
(see Note 1) 3.000 to 4.000 .015" .015" 22% 0%
ASTM-A-214 Under 1.000 .004" .004" 18% 0%
ASME-SA-214 1.000 to 1.500 .006" .006" 18% 0%
ERW Welded 1.501 to 1.999 .008" .008" 18% 0%
Heat Exchanger Tube 2.000 to 2.499 .010" .010" 18% 0%
Minimum Wall 2.500 to 2.999 .012" .012" 18% 0%
(see Notes 1, 2 & 3) 3.000 to 4.000 .015" .015" 18% 0%
4.001 to 7.500 .015" .025" 18% 0%
7.501 to 9.000 .015" .045" 18% 0%
Note 1óAlso available in average wall with ± 10% tolerance.
Note 2óTubes over 2" CD x .135" wall, ID weld flash controlled .010" max. height.
Note 3óTubes 2" CD x .135" waIl & under, ID weld flash controlled 006" max. height.

Hydraulic Tube Tolerances

Specification Size O.D. Range Inches Tolerances
O.D. Wall
Plus Minus Plus Minus
Up to 0.375 .003" .003" 15% 15%
ANSI-B93, 11-1969 0.376 to 0.500 .003" .003" 10% 10%
AMS-5050 1.501 to 2.500 .010" .010" 10% 10%
Cold Drawn Seamless 2.501 to 3.000 .010" .010" 10% 10%
JIC Hydraulic Line 3.001 to 3500 .010" .010" 10% 10%
Up to 0.375 .002" .002" 15% 15%
ANSI-893,4-1969 0.376 to 0.625 .0025" .0025" 10% 10%
SAE-J525 0.626 to 2.000 .003" .003" 10% 10%
Welded & Drawn 2.001 to 2.500 .004" .004" 10% 10%
JIC Hydraulic Line 2.501 to 3.000 .005" .005" 10% 10%
3.001 to 4.000 .006" .006" 10% 10%

Typical Properties

Grade Designation Chemistry-Percent Tensile KSI Yield KSI Elong % In 2" Rockwell Hardness
C Mn P S
A179 CDS .06-.18 .27-.63 .048 max .058 max - - - RB72 max
A214 ERW .18 max .27-.63 .050 max .060 max - - - RB72 max
J524 CDS .18 max .30-.60 .040 max .050 max 55 max 25 mm 35 mm RB65 max
J525 W&D .18 max .30-.60 .040 max .050 max 55 max 25 mm 35 mm RB65 max

The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other purposes.

Production Tube Cutting Inc. can provide competitive tube cutting, tube bending, tube forming, tube machining, custom tube fabrication and tube pre-assembly services for your carbon alloy steel tube requirements, including low carbon steel pressure tube data including heat exchanger tube tolerances, hydraulic tube tolerances and typical properties. Contact us today for a quick quotation or more information.
Request for Quote
Request for Quotation
For an immediate quotation,
click here.
 
TubeWeb® is sponsored by
Production Tube Cutting Inc.

Competitive Source … Competent Solutions.

800-334-7327 (Toll Free)
937-254-6138 (Office)
937-254-7545 (Fax)
Sales: [email protected]
Service: [email protected]
Carbon Alloy Steel Tube and Pipe Stainless Steel Tube and Pipe Non-Ferrous Tube and Pipe